Method Decomposition Refactoring

Method Decomposition Refactoring

When to Use

A method has grown beyond the point where its name describes what it does. The body contains conceptually distinct operations mixed together, or it requires comments to explain sections of code that should be self-explanatory from method names.

The key diagnostic question from Fowler: Length is not the issue. The key is the semantic distance between the method name and the method body. If extracting a fragment into a named method improves clarity — even if the extracted method's name is longer than the code it replaces — extract it.

Signals that decomposition is needed:

This skill executes decomposition. code-smell-diagnosis identifies that decomposition is needed and points here. After decomposition, conditional-simplification-strategy handles any remaining complex conditionals exposed in the extracted methods.

Context and Input Gathering

Required Input

Observable Context

Before starting, read the method and answer these questions:

Local variable inventory:
  - How many local variables does the method declare?
  - Which variables are read-only within a candidate extraction?
  - Which variables are assigned within a candidate extraction?
  - Which variables are used both inside and outside a candidate extraction?
Conceptual block inventory:
  - Where are the comments? Each comment marks a likely extraction boundary.
  - Does the method initialize, then compute, then output? Each phase is a candidate.
  - Are there loops? Each loop and its body is a candidate for extraction.
  - Are there conditionals? Each branch may be a candidate.

Default Assumptions

Process

Step 1: Read and Inventory the Method

ACTION: Read the entire method. List every local variable, its type, where it is assigned, and where it is used. Mark conceptual blocks — typically announced by comments.

WHY: Extract Method's only real complication is local variables. A full inventory before starting prevents surprises mid-extraction (discovering a variable is written inside the extraction and read outside it, which requires returning a value). The inventory also reveals which temp elimination refactoring to apply before extraction.

Categorize each local variable:

Step 2: Eliminate Temp Blockers Before Extracting

ACTION: For each local variable that would block a clean extraction, apply one of:

Replace Temp with Query — when a temp holds a simple expression assigned once and the expression has no side effects.

Mechanics: 1. Find a temp assigned only once. Declare it final and compile — confirms it is only assigned once. 2. Extract the right-hand side of the assignment into a private method. 3. Replace each reference to the temp with a call to the method. 4. Compile and test after each reference replacement. 5. Remove the temp declaration.

See Example 2 below for a full walkthrough.

WHY Replace Temp with Query: Temps are local — visible only inside the method, and they encourage longer methods because the method is the only way to reach the value. A query method is visible to the entire class and can be reused, making the class's code cleaner overall. It also unblocks Extract Method by eliminating variables that would otherwise need to be passed as parameters.

Split Temporary Variable — when a temp is assigned more than once for two different purposes (not a loop variable and not a collecting variable).

Mechanics: 1. Rename the temp at its first declaration and first assignment to a name that reflects only the first use. Declare it final. 2. Change all references from the first assignment up to the second assignment to use the new name. 3. At the second assignment, declare a new temp with the original name. 4. Compile and test. 5. Repeat for further assignments.

WHY Split Temporary Variable: A variable used for two different purposes has two responsibilities. The name cannot honestly reflect both, so it becomes a source of confusion. Splitting it gives each responsibility an honest name and makes each one available for Replace Temp with Query.

Inline Temp — when a temp is assigned the value of a method call once and never reassigned, and the temp is blocking another refactoring (most commonly blocking Extract Method).

Mechanics: 1. Declare the temp final and compile — confirms single assignment. 2. Replace each reference to the temp with the method call expression. 3. Compile and test after each replacement. 4. Remove the temp declaration.

WHY Inline Temp: Temps that simply name a method call result add indirection without adding clarity. When they obstruct a more important refactoring, inlining them is the right trade.

Introduce Explaining Variable — when an expression is too complex to extract into a method (usually because there are too many local variables blocking extraction) and the expression needs a name to be readable.

Mechanics: 1. Declare a final temporary variable whose name explains the purpose of the expression. 2. Replace the expression (or the first occurrence if repeated) with the temp. 3. If the expression is repeated, replace other occurrences one at a time. 4. Compile and test.

WHY Introduce Explaining Variable: This is a stepping stone, not a destination. Fowler prefers Extract Method because a method is available to the whole object while a temp is only local. Use Introduce Explaining Variable when you are inside a tangled algorithm with many local variables that block extraction — the explained temps can later become Replace Temp with Query calls as the tangles loosen.

Step 3: Apply Extract Method

ACTION: For each cohesive code fragment that represents a single concept, extract it into a new method.

WHY Extract Method: It is the most common and highest-value refactoring in the catalog. Short, well-named methods increase reuse (other methods can call them), make higher-level methods read like a series of comments, and make overriding easier because the granularity aligns with the conceptual granularity of the domain.

Full mechanics (9 steps):

1. Create a new method. Name it after the intention — what it does, not how it does it. If you cannot find a name more meaningful than the code itself, do not extract. Why: the name is the primary value of extraction. A good name turns code into self-documentation.

2. Copy the extracted code from the source method into the new target method body.

3. Scan for references to local variables in scope in the source method. These are local variables declared in the source method and parameters of the source method.

4. Handle read-only variables: For variables referenced inside the extracted code but declared outside it, and that are not modified inside the extraction, declare them as parameters of the new method. Why: these are inputs to the computation the method represents; passing them as parameters makes the dependency explicit.

5. Handle variables declared only inside the extracted code: Move their declaration into the target method. After extraction, remove the original declaration from the source method if it no longer appears there.

6. Handle variables modified inside the extracted code: - If only one variable is modified and it is used after the extraction: have the target method return that variable's value; assign the return value in the source method. - If more than one variable is modified: you cannot cleanly extract. Either choose different extraction boundaries, or apply Replace Temp with Query and Split Temporary Variable to reduce the number of modified variables, then try again. As a last resort, apply Replace Method with Method Object (Step 6 below).

7. Pass read variables as parameters into the new method. Compile.

8. Compile when you have dealt with all locally scoped variables.

9. Replace the extracted code in the source method with a call to the new method. If you moved any temp declarations into the target method, remove their declarations from the source method. Compile and test.

The name heuristic: If extracting improves clarity, do it — even if the name is longer than the code you extracted. Fowler: "Length is not the issue. The key is the semantic distance between the method name and the method body."

Step 4: Handle Parameter Assignment

ACTION: If the source method assigns to a parameter variable (not just calling a method on it, but reassigning the parameter reference itself), apply Remove Assignments to Parameters.

WHY Remove Assignments to Parameters: Assigning to a parameter is confusing because it blurs what the parameter represents (the value passed in) with what the local computation produces. In pass-by-value languages (Java, Python, most modern languages), assigning to a parameter only affects the local copy — the caller sees no change — which is a common source of bugs. Using a temp makes the semantics explicit.

Mechanics: 1. Create a temporary variable for the parameter. Initialize it to the parameter's value. 2. Replace all references to the parameter that appear after the assignment with the temp. 3. Change the assignment to assign to the temp instead of the parameter. 4. Compile and test.

Step 5: Apply Inline Method When Indirection Becomes Noise

ACTION: After extraction rounds, if a method's body is as clear as its name — or if you have a cluster of methods that delegate to each other without adding clarity — inline the method back into its callers.

WHY Inline Method: Extraction can overshoot. A method whose name says exactly what its one-line body says adds indirection without adding comprehension. Inline Method also prepares a method for Replace Method with Method Object: inlining all the called methods into the target method first makes it easier to move the whole behavior into the new class.

Mechanics: 1. Confirm the method is not polymorphic (no subclasses override it). Do not inline if they do — subclasses cannot override a method that no longer exists. 2. Find all call sites. 3. Replace each call site with the method body. 4. Compile and test. 5. Remove the method definition.

Step 6: Apply Replace Method with Method Object for Irreducible Tangles

ACTION: If after applying Replace Temp with Query and Split Temporary Variable, the method still has so many local variables that Extract Method cannot be applied cleanly, convert the entire method into its own class.

WHY Replace Method with Method Object: All local variables become fields on the new class, eliminating the parameter-passing problem entirely. Once the method is an object, you can apply Extract Method freely on the compute() method because all the "parameters" are already available as fields. This is the escalation path for methods that resist decomposition.

Mechanics: 1. Create a new class. Name it after the method. 2. Give the new class a final field for the object that hosted the original method (the source object). Give it a field for each parameter and each local variable of the method. 3. Give the new class a constructor that takes the source object and each parameter; assigns them to the corresponding fields. 4. Give the new class a method named compute. 5. Copy the body of the original method into compute. Replace any calls to source object methods with calls via the source object field. 6. Compile. 7. Replace the original method's body with: return new MethodObjectClass(this, param1, param2, ...).compute(); 8. Now apply Extract Method freely on compute() — local variables are all fields, so parameter passing is no longer needed.

Step 7: Apply Substitute Algorithm When a Cleaner Path Exists

ACTION: Once the method is decomposed enough to be understood, if the algorithm itself is unnecessarily complex (a clearer algorithm is known, or a library method already provides the behavior), replace the algorithm wholesale.

WHY Substitute Algorithm: Decomposition makes the algorithm legible enough to evaluate. Sometimes the algorithm can be replaced with a simpler version (a list lookup instead of cascading conditionals, a standard library call instead of manual iteration). You can only substitute safely when the method is small; substituting a large complex algorithm is unreliable.

Mechanics: 1. Prepare the replacement algorithm so it compiles. 2. Run the test suite with both the old and new algorithm available (comment one out) to compare results. 3. If results match, replace permanently. If they differ, use the old algorithm to debug which test cases fail.

Step 8: Verify and Review

ACTION: Run the full test suite. Read the decomposed methods aloud — can each be understood from its name alone?

WHY: The behavioral contract must be preserved exactly. Reading method names aloud is the fastest test of whether the extraction produced intention-revealing names: if you need to look at the body to understand what the method does, the name is still wrong.

Acceptance criteria for completed decomposition:

Key Principles

1. The semantic distance heuristic is the decision rule. Do not count lines. Ask: is there a gap between what this method's name says and what its body does? If the body is implementing "how" at a level of detail that the name abstracts away, extract the implementation detail into its own method. If the name and body are at the same level of abstraction, leave it.

2. Extract Method is the primary technique — the others clear the path to it. Replace Temp with Query, Split Temporary Variable, and Introduce Explaining Variable exist primarily to reduce the local variable count so that Extract Method can proceed. Inline Temp removes a specific class of obstruction. Remove Assignments to Parameters prevents a subtle class of confusion that Extract Method would propagate. Replace Method with Method Object is the escape hatch when all else fails.

3. Names are the product, not the side effect. An extract that produces a well-named method is more valuable than ten extracts that produce vaguely-named helper methods. If you cannot name the fragment better than the comment describing it, the comment is not a good extraction signal in that case.

4. Compile and test after every single step. Each refactoring is designed to be applied in tiny, verifiable increments. Testing after each step means that when something breaks, the cause is obvious — it was the last change. Batching multiple refactorings before testing makes failures hard to diagnose.

5. Replace Temp with Query before Extract Method, not after. The order matters. Eliminating temps first reduces the parameter list of the extraction. Extracting first and then trying to eliminate temps in the extracted method is harder because the scope boundaries have already been drawn.

6. Performance concerns about query methods are almost always premature. Replace Temp with Query introduces repeated method calls that a compiler can optimize or that prove to be negligible. If performance becomes an issue, a profiler will identify it; at that point, putting the temp back is trivial. Readable, factored code is worth the theoretical risk.

Examples

Example 1: Extract Method with No Local Variable Complications

Before — a method with a comment marking an extractable block:

void printOwing() {
    Enumeration e = _orders.elements();
    double outstanding = 0.0;
    // print banner
    System.out.println("******");
    System.out.println("* Customer Owes **");
    System.out.println("******");
    while (e.hasMoreElements()) {
        Order each = (Order) e.nextElement();
        outstanding += each.getAmount();
    }
    System.out.println("name: " + _name);
    System.out.println("amount: " + outstanding);
}

The banner block has no local variable dependencies. Extract directly:

void printOwing() {
    printBanner();
    // ... rest of method
}
void printBanner() {
    System.out.println("******");
    System.out.println("* Customer Owes **");
    System.out.println("******");
}

Example 2: Replace Temp with Query Unblocking Extract Method

Before — discountFactor temp blocks clean extraction because basePrice is used to compute it:

double getPrice() {
    int basePrice = _quantity * _itemPrice;
    double discountFactor;
    if (basePrice > 1000) discountFactor = 0.95;
    else discountFactor = 0.98;
    return basePrice * discountFactor;
}

Step 1 — Replace Temp with Query for basePrice: Declare final, extract right-hand side, replace references, remove declaration:

private int basePrice() {
    return _quantity * _itemPrice;
}

Step 2 — With basePrice as a query, discountFactor can now be extracted:

double getPrice() {
    return basePrice() * discountFactor();
}
private double discountFactor() {
    if (basePrice() > 1000) return 0.95;
    else return 0.98;
}

The final getPrice() has zero local variables and reads like a specification.

Example 3: Replace Method with Method Object for an Irreducible Tangle

Before — gamma() has 3 interacting local variables; any extraction would require multiple output parameters:

int gamma(int inputVal, int quantity, int yearToDate) {
    int importantValue1 = (inputVal * quantity) + delta();
    int importantValue2 = (inputVal * yearToDate) + 100;
    if ((yearToDate - importantValue1) > 100) importantValue2 -= 20;
    int importantValue3 = importantValue2 * 7;
    return importantValue3 - 2 * importantValue1;
}

Create class Gamma with a field for the source object and a field for each parameter and local variable. Add a constructor and a compute() method containing the original body. Replace the original body with return new Gamma(this, inputVal, quantity, yearToDate).compute();

Now each fragment of compute() can be extracted without passing any parameters — they are already fields. The if block becomes importantThing() with no arguments.

Decision Framework: Which Technique When?

Long method to decompose
│
├── Does a candidate fragment have zero modified local variables?
│   └── YES → Extract Method directly (pass read-only vars as params)
│
├── Does a candidate fragment have exactly one modified variable?
│   └── YES → Extract Method; return that variable's value
│
├── Does a candidate fragment have 2+ modified variables?
│   ├── Can you change temps to query methods? → Replace Temp with Query first
│   ├── Is a temp used for two different purposes? → Split Temporary Variable first
│   ├── Is a temp trivially assigned from a method call? → Inline Temp first
│   └── Still too many params after all the above? → Replace Method with Method Object
│
├── Is a temp needed only to name a complex sub-expression?
│   └── Prefer Extract Method (reusable) over Introduce Explaining Variable (local)
│   └── Use Introduce Explaining Variable only when extraction is blocked by other vars
│
├── Is the method body as clear as the method name?
│   └── YES → Inline Method (remove the indirection)
│
├── Is a parameter being reassigned inside the method?
│   └── YES → Remove Assignments to Parameters first
│
└── Is the algorithm correct but needlessly complex?
    └── YES → Substitute Algorithm (only after method is small enough to test confidently)

References

| File | Contents | When to read | |------|----------|--------------| | references/composing-methods-mechanics.md | Full step-by-step mechanics for all 9 techniques with edge cases | When a specific technique behaves unexpectedly | | references/local-variable-decision-tree.md | Extended decision tree for local variable classification | When local variable analysis is ambiguous |

Related skills:

License

This skill is licensed under CC-BY-SA-4.0. Source: BookForge — Refactoring: Improving the Design of Existing Code by Martin Fowler and Kent Beck.

Related BookForge Skills

Install related skills from ClawhHub:

Or install the full book set from GitHub: bookforge-skills

Example 1: Extract Method with No Local Variable Complications

Before — a method with a comment marking an extractable block:

void printOwing() {
    Enumeration e = _orders.elements();
    double outstanding = 0.0;
    // print banner
    System.out.println("******");
    System.out.println("* Customer Owes **");
    System.out.println("******");
    while (e.hasMoreElements()) {
        Order each = (Order) e.nextElement();
        outstanding += each.getAmount();
    }
    System.out.println("name: " + _name);
    System.out.println("amount: " + outstanding);
}

The banner block has no local variable dependencies. Extract directly:

void printOwing() {
    printBanner();
    // ... rest of method
}
void printBanner() {
    System.out.println("******");
    System.out.println("* Customer Owes **");
    System.out.println("******");
}

Example 2: Replace Temp with Query Unblocking Extract Method

Before — discountFactor temp blocks clean extraction because basePrice is used to compute it:

double getPrice() {
    int basePrice = _quantity * _itemPrice;
    double discountFactor;
    if (basePrice > 1000) discountFactor = 0.95;
    else discountFactor = 0.98;
    return basePrice * discountFactor;
}

Step 1 — Replace Temp with Query for basePrice: Declare final, extract right-hand side, replace references, remove declaration:

private int basePrice() {
    return _quantity * _itemPrice;
}

Step 2 — With basePrice as a query, discountFactor can now be extracted:

double getPrice() {
    return basePrice() * discountFactor();
}
private double discountFactor() {
    if (basePrice() > 1000) return 0.95;
    else return 0.98;
}

The final getPrice() has zero local variables and reads like a specification.

Example 3: Replace Method with Method Object for an Irreducible Tangle

Before — gamma() has 3 interacting local variables; any extraction would require multiple output parameters:

int gamma(int inputVal, int quantity, int yearToDate) {
    int importantValue1 = (inputVal * quantity) + delta();
    int importantValue2 = (inputVal * yearToDate) + 100;
    if ((yearToDate - importantValue1) > 100) importantValue2 -= 20;
    int importantValue3 = importantValue2 * 7;
    return importantValue3 - 2 * importantValue1;
}

Create class Gamma with a field for the source object and a field for each parameter and local variable. Add a constructor and a compute() method containing the original body. Replace the original body with return new Gamma(this, inputVal, quantity, yearToDate).compute();

Now each fragment of compute() can be extracted without passing any parameters — they are already fields. The if block becomes importantThing() with no arguments.