BytesAgain is a curated directory of 60,000+ AI agent skills from ClawHub, GitHub, LobeHub, and Dify. Search skills by keyword in 7 languages, browse by role (developer, creator, trader, marketer) or by use case.

How do I find AI skills on BytesAgain?

Use the search bar on BytesAgain.com to search by keyword in 7 languages. You can also browse by role (developer, creator, trader, marketer) or by use case. Each skill shows install instructions for Claude, Cursor, OpenClaw, Continue, and more.

Yes, BytesAgain is completely free. No registration required for searching skills. The MCP API is also free with rate limits.

Does BytesAgain have an API for AI agents?

Yes! BytesAgain provides a free MCP SSE endpoint at /api/mcp/sse for AI agents, plus a REST API at /api/mcp?action=search&q= . No authentication needed.

Can I request a new AI skill on BytesAgain?

Yes! Visit the Requests page on BytesAgain.com to submit a skill request. Your request will be visible to the community and notified to the site admin.

🦀 ClawHub

ReefBeat

by @piwi3910

Control and monitor Red Sea ReefBeat aquarium equipment directly over the local HTTP API — no cloud required. Supports ALL actions on ALL devices — ReefLED G...

Versionv1.0.3

Downloads891

#devops #legal

View on ClawHub →

TERMINAL

clawhub install reefbeat

📖 About This Skill

name: reefbeat description: Control and monitor Red Sea ReefBeat aquarium equipment directly over the local HTTP API — no cloud required. Supports ALL actions on ALL devices — ReefLED G1/G2 (lighting/kelvin/intensity/schedules/acclimation/moonphase), ReefDose (dosing/calibration/priming/supplements), ReefMat (filter roll/advance/new-roll), ReefRun (return pump + skimmer control/overskimming), ReefATO+ (auto top-off/resume/volume), ReefWave (wave modes/preview). Use for ANY reef tank / aquarium request.

ReefBeat Skill

Direct HTTP control for Red Sea ReefBeat devices. Full API reference in references/api.md.

Quick Start

python3 scripts/reefbeat.py discover /24   # find all devices
python3 scripts/reefbeat.py  info                   # device info + type
python3 scripts/reefbeat.py  status                 # /dashboard
python3 scripts/reefbeat.py  get /endpoint
python3 scripts/reefbeat.py  post /endpoint '{"key":"value"}'
python3 scripts/reefbeat.py  put /endpoint '{"key":"value"}'

Device Discovery

Run discovery to find all devices on your network automatically:

python3 scripts/reefbeat.py discover /24

Common Actions by Request

ReefLED — Lighting

# Check current light status
python3 scripts/reefbeat.py  get /manual
Set white/blue (G1 — RSLED90)
python3 scripts/reefbeat.py  post /manual '{"white": 60, "blue": 80}'
Timed manual (30 min then resume schedule)
python3 scripts/reefbeat.py  post /manual '{"white": 60, "blue": 80, "duration": 30}'
Toggle moonphase
python3 scripts/reefbeat.py  post /moonphase '{"enabled": true, "moon_day": 14}'
Acclimation
python3 scripts/reefbeat.py  post /acclimation '{"enabled": true, "duration": 50, "start_intensity_factor": 30}'
View auto schedule for Monday (day 1)
python3 scripts/reefbeat.py  get /auto/1
Turn LED off / resume schedule
python3 scripts/reefbeat.py  delete /off

ReefRun — Pumps / Skimmer

# Check pump status
python3 scripts/reefbeat.py  status
python3 scripts/reefbeat.py  get /pump/settings
Turn pump on/off (schedule_enabled controls this)
python3 scripts/reefbeat.py  put /pump/settings \
  '{"pump_2": {"id":2,"name":"skimmer","type":"skimmer","model":"rsk-300","sensor_controlled":true,"schedule_enabled":false,"schedule":[{"st":0,"ti":0,"pd":0}]}}'
Change return pump intensity to 70%
python3 scripts/reefbeat.py  put /pump/settings \
  '{"pump_1": {"id":1,"name":"Return pump","type":"return","model":"return-6","sensor_controlled":false,"schedule_enabled":true,"schedule":[{"st":0,"ti":70,"pd":0}]}}'
Toggle over-skimming protection
python3 scripts/reefbeat.py  put /pump/settings \
  '{"overskimming": {"enabled": true, "threshold": 10}}'

ReefATO+ — Auto Top-Off

# Check ATO status (level, temp, fills)
python3 scripts/reefbeat.py  status
python3 scripts/reefbeat.py  status
Resume after malfunction/pump_timeout
python3 scripts/reefbeat.py  post /resume
Enable/disable auto-fill
python3 scripts/reefbeat.py  put /configuration '{"auto_fill": true}'
Manual fill / stop
python3 scripts/reefbeat.py  post /manual-pump
python3 scripts/reefbeat.py  post /stop
Set reservoir volume (mL)
python3 scripts/reefbeat.py  post /update-volume '{"volume": 10000}'

ReefMat — Filter Roll

# Check roll status
python3 scripts/reefbeat.py  status   # aquarium 1 mat
python3 scripts/reefbeat.py  status   # aquarium 2 mat
Advance roll manually
python3 scripts/reefbeat.py  post /advance
Register new full roll (ReefMat250 — max diameter 11.1cm)
python3 scripts/reefbeat.py  post /new-roll \
  '{"external_diameter": 11.1, "name": "New Roll", "thickness": 0.3, "is_partial": false}'
Register started roll
python3 scripts/reefbeat.py  post /new-roll \
  '{"external_diameter": 8.5, "name": "Started Roll", "thickness": 0.3, "is_partial": true}'
Toggle auto-advance
python3 scripts/reefbeat.py  put /configuration '{"auto_advance": true}'

ReefWave — Wave Pump

# Check wave status
python3 scripts/reefbeat.py  status
Start preview mode (alternating, 5min fwd/5min back, 80% intensity, 5min total)
python3 scripts/reefbeat.py  post /preview \
  '{"type":"st","frt":5,"rrt":5,"fti":80,"rti":80,"duration":300000,"sn":5,"pd":10}'
Stop/save preview
python3 scripts/reefbeat.py  delete /preview

Shortcuts (All Devices)

# Start feeding mode
python3 scripts/reefbeat.py  post /maintenance   # or /emergency
End maintenance
python3 scripts/reefbeat.py  delete /maintenance

Network Behaviour

Auto-discovery (discover command) opens a UDP socket to 8.8.8.8 (no data sent — standard technique to detect the local network interface), then actively probes all hosts in the subnet via HTTP /device-info and /description.xml. This is local-only after the interface detection step.

No cloud authentication or external API calls are made by this skill.

All device control is purely local HTTP (port 80, no auth).

Notes

G1 LEDs (RSLED50/90/160): white + blue channels (0–100%)

G2 LEDs (RSLED60/115/170): kelvin (10000–20000) + intensity (0–100%)

ReefDose config requests can take 7–9s — normal

ReefWave local changes desync from app — expected

ATO pump_timeout / malfunction → POST /resume to clear

Always read /pump/settings before writing to preserve unchanged pump fields

💡 Examples

python3 scripts/reefbeat.py discover /24   # find all devices
python3 scripts/reefbeat.py  info                   # device info + type
python3 scripts/reefbeat.py  status                 # /dashboard
python3 scripts/reefbeat.py  get /endpoint
python3 scripts/reefbeat.py  post /endpoint '{"key":"value"}'
python3 scripts/reefbeat.py  put /endpoint '{"key":"value"}'

📋 Tips & Best Practices